Copy of 2 Ways To Install

 Quick Conversion Guide!
1cm = 30mm ~ (1 1/8")
 2cm = 20mm ~ (3/4")
18mm ~ (11/16")
12mm ~ (1/2")
8mm ~ (5/16")

 

S-BOX™ INSTALLATION OPTIONS

There are two alternative positions to install every S-Box™ pop-up unit; both will require the countertop to be pre-cut by your specialist supplier (just like a sink or a hob!) so please plan this in advance and include it in the worktop’s template and cutting process.

The two methods are either:  SURFACE MOUNT or  CHAMELEON (20mm below surface)

SURFACE MOUNT

Product drops into pre-cut hole. (see TECH DATA for dims) Suitable for any worktop thickness.

Collar sits on work surface.

3mm stainless steel heat-proof top is provided.

 

SURFACE MOUNT (FLUSH)

 

Product drops into pre-cut hole. (see TECH DATA for dims) Suitable for any worktop thickness.

Surface Collar sits in a shallow (2.5mm) rebate for a “flush” finish. 3mm stainless steel heat-proof top is provided.

 

The ultimate installation option is to position the unit at -20mm below the counter surface on a rebate or ‘shelf’. This enables the S-Box™ to be disguised in its location and deploy its full CHAMELEON skills! 

 

CHAMELEON 'TRUE' REBATE IN 30mm MATERIAL

For worktops of 30mm thickness or greater (eg. Granite/Timber) Unit sits in a 20mm deep x 8mm wide rebate.

Mounting Collar sits on this rebate.

A custom top is cut from extra material (up to max 12mm thick)see TECH DATA for full instructions

 

CHAMELEON 'FALSE' REBATE FOR 20mm MATERIAL

 

For worktops 20mm thick e.g. Composite / Quartz. Requires a rebate to be “created” by using a second layer material.

Mounting Collar sits on this false rebate.

A custom top is cut from extra material (up to max 12mm thick)see TECH DATA for full instructions

 
 

CHAMELEON 'FALSE' REBATE FOR 12mm MATERIAL

For worktops 12mm thick (e.g. Composite / Quartz) Requires a rebate to be “created” by using a second layer material, such as plywood.

Mounting Collar sits on this false rebate 20mm recessed

A custom top is cut from extra material (up to max 12mm) thick) see TECH DATA for full instructions